The INRAD DMS-629 and DMS-650 microphones have been chosen by FlexRadio as the official desk microphones for use with all of our transceivers. M629 or M650 microphone, DMS-1 heavy PTT desk stand and a detachable coiled cable that runs from the back of the base into the microphone jack on your radio. These are sold as a complete package at $158 retail.
Plug the detachable coiled cable into the mic jack on your transceiver, and you’re ready to operate. To use the microphones with any of the 3 conductor TRS + RCA phono, 8 pin Foster, or RJ-45 modular, plug in a different accessory cable. Easy! One detachable cable is included with the $158 purchase price.
The base is metal and weighs 2.5 pounds to keep it from sliding around or being knocked over easily on the desk. Total weight of base and desk microphone, over 4 pounds. Metal microphone body, standard 5/8 x 27 thread metal standpipe, rubberized microphone clip. The circular rubber ring around the circumference of the metal standpipe for the mic clip is an internal shock mount for noise isolation.
Large push-to-talk switch on the base front. To lock the PTT for those longer QSO’s, slide the silver slider switch to the left while the PTT switch is down. To release, slide back to the right.
Want a different on-air sound from a different INRAD microphone? The M-series microphones on the base are also interchangeable. To change from one mic to another, unplug the 3 pin XLR cable from the back of the mic and pull it off the clip. Plug in the new mic, put it on the stand. It’s that simple.
Alternatively, the M-series microphones can be purchased alone. M-series microphones are supplied with a cable from 3 pin XLR to 1/8″ mono male jack that is used with M-series adapters to plug into the transceiver.
Airspy HF+ and SpyServer streaming FFT and Audio data to an Android watch. @mm6dos Took the concept a step further! #sdrsharpinside pic.twitter.com/bW… Read more
Icom revealed their first Software Defined Radio (SDR) HF transceiver, the IC-7300, on Saturday, August 22nd 2015, at the Tokyo Ham Fair… Read more
Steve (K9AN) and I have developed a potential new mode for WSJT-X. We’re calling the mode “FT8” (Franke-Taylor design, 8-FSK modulation). FT8 is desi… Read more
Designed for Weak Signal, Tropo Scatter, Meteor Scatter, Digital, & Contest Operation! The BEKO HLV-1250 is a special 25th Anniversary Amplifier c… Read more
JVCKENWOOD Corporation (JVCKENWOOD) will release TS-590SG70, an HF/50 MHz special specification transceiver with the TRIO logo under the KENWOOD brand… Read more
“RFinder has been the ‘Social Repeater Directory’ for a while now with its support of repeater check-in postings to APRS and… Read more
The third public test of FT8 DXpedition Mode on May 5 is being called a success. The goal of the exercise was to simulate a rare DXpedition pileup on… Read more
The second public test of FT8 DXpedition Mode has shown that the mock DXpedition stations (“Foxes”) were able to work the pileups of callers (“Hounds”… Read more
MixW 4 is a new multi-mode, multi-platform software for radio amateurs. A completely new outlook. Tons of new features. JT65 and FT8 modes. Kiw… Read more
The second public test of FT8 DXpedition Mode will take place on April 7, and all radio amateurs are invited to participate. WSJT-X Developer Joe Tayl… Read more
Powered by WPeMatico