Alaska’s super-power High-Frequency Active Auroral Research Program (HAARP) transmitters in Gakona, Alaska, will take advantage of the WSPR digital protocol and the Weak Signal Propagation Reporter Network (WSPRnet) during a short experimental campaign, July 30 through August 1. University of Alaska Fairbanks (UAF) Space Physics Group researcher and HAARP Chief Scientist Chris Fallen, KL3WX, told ARRL that he’ll be conducting research into ionospheric irregularities, but hardly with a weak signal.
“I am conducting a dual-use experiment to create field-aligned — plasma density — irregularities while also modulating the HF beam for a WSPR beacon test,” he said. Specifically, Fallen will be looking at plasma density irregularities in the F-layer of the ionosphere.
Fallen said the WSPR experimental periods are tentatively planned to last about 30 minutes per day and occur between approximately 2300 and 2400 hours UTC on all 3 days, which would put the operations during daylight hours in US time zones. Most transmissions will be at the WSPR 80-meter default frequency of 3.592.6 MHz, Fallen said. HAARP will use full-carrier AM, since it’s not equipped to transmit SSB. The call sign will be WI2XFX. The HAARP transmitters can generate megawatts of RF.
“One irregularity is that the actual transmit power will be higher than what is reported since it is out of range of what the software allows to be encoded,” Fallen told ARRL.
“These daytime 80-meter conditions are not ideal for a propagation test, but are the result of a compromise with other science objectives and operational constraints,” Fallen said. “I hope that this will be a useful trial for future propagation tests that utilize beacon networks maintained by hams. If I have a little bit of time remaining in my budget, I will try to accommodate a 40-meter test as well.”
Fallen said he’s using WSPRnet to retrieve signal reports automatically, rather than by soliciting listener reports, which often do not include the location and signal strength information his research requires.
“We will conduct a short test each day — admittedly not QRP, but the test will be short — transmitting on even numbered minutes, and then later collecting from the database the spots reported by each station that received HAARP,” Fallen explained. “This will demonstrate the concept of using a large and incredibly variable — in terms of frequency, power, and direction — HF transmitter such as HAARP, in conjunction with WSPRnet, to generate snapshots of HF propagation conditions from a point source in the subarctic.”
Fallen said hams have been requesting something like this, although with far more asking for FT8 than for WSPR transmissions. “But, I am having trouble figuring out specifically how FT8 would work with HAARP,” Fallen said.
Fallen said the Amateur Radio bands are not included in HAARP’s permanent Part 5 Experimental license authorization, but UAF routinely seeks a Special Temporary Authorization (STA, attached) that permits access to some amateur frequencies.
The Doctor offers advice about antenna options for the upcoming ARRL Field Day. Read more
“Magnetic Loops” is the topic of the latest (July 28) episode of the “ARRL The Doctor is In” podcast. Listen…and learn! Sponsored by DX Engineer… Read more
G3TXQ 6 Band Hexbeam 40m single element add on kit Some of you may remember the 7 band Hexbeam that was in production a few years ago. Due to the comp… Read more
SpecificationFeaturesAccessories S15 Rugged Outdoor phone Specification Basic Parameter Model Rangerfone S15 Color Black Design Bar OS Android… Read more
Radioddity GD-55 UHF Waterproof DMR Digital Radio, with GPS Function! 10W with 2800mAh Lithium Polymer (Li-Po) Battery
Introducing the Radioddity GD-55, A Tougher DMR Radioddity’s first proprietary radio is designed to meet the most demanding of conditions, and dole ou… Read more
Yaesu FTM-7250DR C4FM/FM 50W 144/ 430MHz Digital AMS The new Yaesu FTM-7250DR is a compact and ruggedly built C4FM/FM 144/430MHz Dual Band 50W Transc… Read more
Kenwood TS-990S HF/6m Giving you a rare glimpse behind the scenes at Kenwood’s Communications Division factory at Yamagata, in northern Japan,… Read more
In part one of our reports from Hamfest 2017 we have a sneak preview of the Icom IC-7610 and IC-R8600 rigs. We meet the new owners of PW Magazine, and… Read more
Powered by WPeMatico