NooElec have recently released a new LNA + filter combo called the “SAWbird+ H1 Barebones” which significantly lowers the entry bar for new amateur radio astronomers. It’s designed to be used with RTL-SDR or other SDRs for radio astronomy, and in particular reception of the Hydrogen line.
The filter is centered at 1.42 GHz with a 70 MHz bandpass region. The LNA has a minimum gain of 40dB. For hydrogen line observations it is important that the LNA have very low noise figure, and this LNA fits the bill with a ~0.5dB to ~0.6dB noise figure. An additional feature on the PCB is an RF switch that is electrically controlled via expansion headers. This switch allows you to switch out the LNA for a 50 Ohm reference which is useful for calibration in more serious radio astronomy work.
This LNA draws 120mA of current meaning that it will work with the RTL-SDR V3 and Airspy’s bias tee, but probably not with the SDRplay’s bias tee which is limited to 100mA and seems to trip a fuse at higher current draws. For an SDRplay you could use external power instead, although you will need an additional DC blocking cap to prevent power from entering the SDR and destroying the ESD diodes.
If you don’t know what the Hydrogen line is, we’ll explain it here. Hydrogen atoms randomly emit photons at a wavelength of 21cm (1420.4058 MHz). Normally a single hydrogen atom will only very rarely emit a photon, but space and the galaxy is filled with many hydrogen atoms so the average effect is an observable RF power spike at 1420.4058 MHz. By pointing a radio telescope at the night sky and integrating the RF power over time, a power spike indicating the hydrogen line can be observed in a frequency spectrum plot. This can be used for some interesting experiments, for example you could measure the size and shape of our galaxy. Thicker areas of the galaxy will have more hydrogen and thus a larger spike. You can also measure the rotational speed of our galaxy by noting the frequency doppler shift.
Although this LNA lowers the entry bar, in order to receive the Hydrogen line with the SAWBird+ H1 you will still need a ~1m+ satellite dish and a feed tuned to 1.42 GHz or high gain Yagi, horn or helical antenna. Antennas and feeds like this are not yet available off the shelf, but if you search our blog for “hydrogen line” you’ll see many project examples.
The post NEW LNA + FILTER FOR RADIO ASTRONOMY HYDROGEN LINE OBSERVATIONS RELEASED BY NOOELEC appeared first on QRZ NOW – Ham Radio News.