Nerfd.net – RF News & Info

TR-35 4-Band 5-Watt CW Transceiver Kit

DC Input Voltage Vs. Typical RF Output

DC In 17 meters 20 meters 30 meters 40 meters
9.5V 4.4W 4.5W 4.9W 4.0W
10V 4.8W 5.0W 5.1W 4.5W
12V 6.5W 7.0W 7.8W 6.2W
14V 8.5W 9.5W 10W 8.5W
  • Size 5 ½ X 3 ¼ X 1 ½ less protrusions, weight 10.6 Oz
  • 5 watts output on all bands at 12vdc input
  • Full coverage of 40, 30, 20, and 17 meters with extended RCVR  tuning above and below
  • RCVR modes for CW narrow and CW wideband, and for SSB reception
  • Optimized for operation from 3 series-connected 18650 Lithium cells
  • RIT tunes + and – 5KHz
  • Blue OLED display reads frequency to 10 Hz and RIT offset
  • Built in Iambic keyer is adjustable 5 to 45 WPM with front panel control
  • Separate jacks for straight key and paddles; Always ready for SKCC contacts
  • Operates on 9.5 to 14 volts, < 100 ma receive, about 1 Amp Xmitt at 10 volts
  • Selectable tuning resolution steps of 10, 100, and 1000Hz
  • Low battery indicator with internal adjustment 9.5 to 11.5 volts 
  • Front panel adjustable RF gain control
  • Front panel TX power control; Adjustable from 0 to full output
  • Rugged TO-220 FET RF amp has delivered 5 Watts key down for 5 minutes
  • Signal quality blue LED, RIT warning orange LED, Low battery red LED
  • Excellent receiver sensitivity with MDS of -125dBm
  • Very effective receive AGC prevents ear damage with strong signals
  • Transmitter harmonics and spurs -52dB, meets FCC specs
  • CW sidetone is the actual transmitter signal as heard by receiver
  • Match the received signal tone to the sidetone for perfect zero beating
  • Sharp IF filter; Better than 350 Hz at the -6dB point, plus 700 Hz audio filter
  • Over 250 machine placed SMT parts, and about 55 user installed parts
  • All critical circuits are factory pre-aligned and calibrated
  • No endless “back menus”; There is a control or switch for every function
  • Factory wired and tested option available
  • All torroids are factory wound and prepared

Resources

Antenna

6M-F Magnetic Loop

A 50~54 mHz high performance,  CNC manufactured, all aluminum magnetic loop antenna. At only 18 inches, and 1½ pounds, it’s an excellent choice for re… Read more



Review


Equipment

 

The post TR-35 4-Band 5-Watt CW Transceiver Kit appeared first on QRZ NOW – Ham Radio News.

Exit mobile version