Well used 100% fully functional Yaesu FT-857 multiband mobile
The display is perfect, no tiger striping, no missing lines.
Includes external multi-function SWR/PWR/SIG meter
(you only get 1 meter, both colors are shown for contrast)
Includes BLUETOOTH CAT-CIV control module
Includes, standard mic, separation cable, (20′) head mounting bracket
mobile fused power cord, approx 1m.
Laser printed manual, supplement and updated supplement (about 340 pages) professionally bound
| Amateur HF/VHF/UHF transceiver | |
| Frequency range: | TX: 10-160 m + WARC / 6 m / 2 m / 70 cm RX: 0.1-76 / 118-164 / 420-470 MHz |
| Tuning steps: | 10 / 20 / 100 / 200 Hz, 2.5 / 5 / 6.25 / 9 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz |
| Frequency stability: | ±4 ppm @ 25°C (77°F) during the first 60 minutes after power on 1 ppm / hour thereafter ±0.5 ppm option (TCXO-9) |
| Mode: | TX: AM / FM / NFM / SSB / CW RX: AM / FM / NFM / SSB / CW / WFM |
| Channels / memory management: | 200 regular with alpha tags 4 home 5 scan edge pairs (PMS) Priority function 1 QMB Non-volatile EEPROM storage |
| Repeater shift / offset: | ±0-99.99 MHz |
| Power supply: | 13.8 VDC ±15% (6-pin Molex connector on pigtail) |
| Current drain / power consumption: | RX: 0.55-1 A TX: Max 22 A |
| Antenna impedance / connector: | 50 ohm / One SO-239 and one N-jack (Europe) or two SO-239 (USA) |
| Dimensions (W*H*D): | 155*52*233 mm (6.1*2.05*9.17″) |
| Weight: | 2.1 Kg (4.63 lb) |
| Other features: | CTCSS/PL and DCS with tone search. Built-in keyer. Beacon mode. Spectrum scope monitor. Detachable front panel. CW trainer. 32 color display. Dimmer. CAT control. Beacon feature. Cloning. Attenuator (10 dB). NB. ARS. ARTS. 1K2 / 9K6 packet jack. DSP option. |
Tuner option
Add $200 for a demo LDG Z11 Pro II, $210 for a NIB Z11 Pro II, either with Yaesu cable
This is a great complete shack needing only an antenna & power supply.
The post Yaesu FT-857 first appeared on Hamshack.