Xiegu X6100 HF/50MHz Portable SDR Transceiver

Xiegu X6100 is a revolutionary self-contained 10 watt HF and 6m SDR transceiver with a large color display, automatic antenna tuner and a built-in high capacity battery.

Xiegu X6100 is an ultra-portable SDR transceiver (Software Defined Radio) for HF and 6m. High performance and rich functionality is provided by a direct down-conversion and sampling architecture. With its compact size and smart form factor X6100 brings you a brand-new experience of amateur radio.

X6100 has independent baseband and RF units. The baseband unit provides control, advanced data processing, digital signal processing, multimedia interface functions, and can add new functions continuously through firmware updates. The RF unit is based on the SDR structure with separate transmit and receive paths. With a 24bit sampling rate and large dynamic RF front-end unit, the X6100 is a high performance transceiver that lets you work the world when you’re out on an adventure in nature, in the camper or on a beach far away.

X6100 sports two USB interfaces, one USB to serial adapter with sound card and another to support mouse, keyboard and storage devices. A microSD card slot allows for backup and transfer of memory channels and voice keyer recordings. An XPA125B amplifier can connect via with a dedicated cable (optional accessory) to provide for 100W transmit power. External third-party SDR software applications like HDSDR can be connected via the I/Q signal output.

Xiegu X6100 Key Features

HF/50MHz all mode including data
10 W transmit power with external power source, 5 W with internal battery
4″ high-resolution color screen, 800*480 pixels resolution
Built-in large capacity lithium battery pack, 12V, 3,5 Ah
Built-in efficient automatic antenna tuner
Standing wave scanner
Voice memory keyer
CW memory keyer
Bluetooth and WiFi supports wireless audio, keyboard & mouse
Onboard USB serial adapter with sound card
Second USB host port to support mouse, keyboard and storage device
High stability TCXO internal clock source

Xiegu X6100 General Specifications

Frequency coverage: 0,5-30+50-54MHz (Transmit in Ham Bands)
Operating modes: USB/LSB (J3E), CW (A1A), FM (F3E)，RTTY (F1B), AM (A3E)
Minimum Frequency Step: 1 Hz
External power supply voltage: DC9-15V
Frequency stability: 1ppm (after 20 min warm-up)
Antenna Impedance: 50 Ohm
Antenna connector type: BNC
Operating temperature range: 0C to +50C

Xiegu X6100 Receiver Specifications

Frequency coverage: 0,5-30+50-54MHz
Receive sensitivity (10dBS/N)
- (PRE=on, ATT=off, NB=off,NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)
- SSB/CW: 0.20 uV
- AM 0,55-1,79 MHz: 10 uV
- AM 1,8-30 MHz: 2 uV
- AM 50-54 MHz: 2 uV
ADC: 24 bit
Spectrum display bandwidth: 96 kHz
Spectrum refresh rate: 25 frames/a
Spectrum background noise: -140 dBm
Audio output: 0,5W (4 Ohm ≥10% THD)
2kHz BDR (Critical frequency suppression): ≥110 dB
RMDR: ≥85 dB
IMD3: ≥95 dBMDS: -138 dBm

Xiegu X6100 Transmitter Specifications

Frequency range
- 1.8~2.0 MHz
- 3.5~3.9 MHz
- 5.3515~5.3665 MHz
- 7.0~7.2 MHz
- 10.1~10.15 MHz
- 14.0~14.35 MHz
- 18.068~18.168 MHz
- 21.0~21.45 MHz
- 24.89~24.99 MHz
- 28.0~29.7 MHz
- 50~54 MHz
Output Power, internal battery: 5W
Output Power, external power supply: 10W
Stray suppression ≥ 60dB
Sideband suppression: ≥50dB
SSB Frequency Response: 300-2700Hz (-6dB)
FM Modulation Swing; +/- 5kHz
Mic Impedance: o,2-10k (600 Ohm typical)
Antenna tuner tuning impedance range: 12.5-200 Ohm
Antenna tuner initial tuning time: ≥ 10s
Antenna tuner memory recall time ≥ 0.1s